If it is impossible to connect a suburban area to a centralized gas supply for some reason and is not planned at least in the coming years, then heating from private boilers is often used to heat private houses - the solution has several advantages, although it is not without drawbacks.
In order to use the device effectively, it is important to correctly select the electrical equipment and circuit diagram. We offer you to understand the design and functional features of different types of electric boilers, as well as evaluate the features of various options for connecting the units to the heating system.
For those who plan to organize housing heating from an electric appliance, it will be useful to learn how to use the double tariff in order to reduce electricity charges.
Classification of equipment and principle of operation
An electric boiler converts electrical energy into heat and, depending on the design features, can be:
- TENOV;
- electrode;
- induction.
Regardless of the type, modern models are equipped with a thermostat, with which you can adjust the power of the device and the degree of heating of the coolant.
Usually there is the opportunity to receive information from an external sensor to control the temperature of the air mass in a particular room.
Device with heating heater
Inside the tank, designed for water, install heating elements - heating elements. They can be made in the form of tubes or plates. To regulate the degree of heating, the heaters are switched on alternately.
Water enters the tank, heats up, then transfers to the circuit. As it cools or heats up, individual heating elements turn on or off. The coolant movement is controlled by an integrated circulation pump.
Depending on the size and type of heating elements, electric boilers can be wall or floor. It is necessary to choose a place for installation of the device so that it is convenient to maintain
You can choose dual-circuit models of such boilers, they heat the water not only for heating, but also for the water supply. TEN devices are popular due to their simple design and relatively low price. With proper operation, they break extremely rarely.
In addition to water, various concentrations of antifreeze or oil compositions are used as a heat carrier. But the sizes of such devices are usually quite large, which limits the possibilities when choosing a place for their installation. Over time, plaque settles on the heating elements, periodically the heating elements must be replaced.
Electrode boiler for heating
For heating, the potential difference at the two electrodes and the natural resistance of the water arising from the salts dissolved in it are used here. These are compact devices that can quickly heat small volumes of water.
Electrode boilers are very compact, they are easy to install, but such devices work only with water having a specific resistivity
An integrated circulation pump is not needed here. This is a simple device that almost never breaks. And if this happens, it is not difficult to repair it. The price of devices of this type can be called affordable.
But oil and antifreeze for such a boiler will not work, only water is acceptable as a heat carrier, but not distilled. Over time, the electrodes wear out, dissolve in water. They need to be periodically replaced with new elements.
Induction heating device
In such boilers, the heating element is made of a dielectric casing with a coil and core wound around it. The current in the coil causes a potential difference in the core, which heats up quickly enough. Thermal energy is transferred to the coolant.
Boilers with an induction principle of operation are resistant to wear, they have high efficiency and last extremely long. The design is so simple that it can be made from improvised means
This is a boiler with high efficiency and a long service life. Industrial models are quite expensive, but you can make a homemade induction analog if you wish. Any liquid coolant is suitable, and cases of breakdowns are extremely rare.
Heating system connection options
Electric boilers are used in systems with a liquid coolant that circulates through pipes.
These can be traditional radiator options:
- with the natural movement of the coolant;
- with forced circulation;
- combined options.
In addition, boilers are successfully used in water floor heating systems. They are also suitable where they combine radiators as the main source of heating and heating as a complement to it. When heating on the basis of an electric boiler, a suitable circuit should be selected.
Natural type system
Such a system works by exploiting the ability of water to expand upon heating. The hot fluid rises, displacing the cooled water from the circuit. It returns to the heat exchanger, heats up, replaces the cooled liquid, etc. The electric boiler in this case is placed in the lower part of the circuit.
In order for the gravitational heating system to work correctly, it is important to choose sufficiently wide pipes and lay them with the correct slope (+)
The implementation of a system with natural circulation of water along the circuit requires competent calculation and proper installation.
You will need a significant number of pipes of a certain diameter, which must be laid with the desired slope. Problems may arise if you need to adjust the power of the device and change the level of heating of the coolant.
Forced Circuit
Here, the movement of hot water through the pipes is provided by a pump connected to the system. In addition to it, you will also need a membrane expansion tank and equipment that ensures its functioning: pressure gauge, shut-off valves, etc.
The electric boiler is placed at the bottom, then an expansion tank is connected to the system, after which the circulation pump is mounted.
To ensure forced circulation of the coolant through the system, you will need a circulation pump, a membrane expansion tank, as well as other elements (+)
This type of circuit is less sensitive to the characteristics of pipes and radiators, which provides ample opportunity to choose suitable components. It is in such systems that antifreeze can be used. The possibilities for regulating the temperature of the water in the circuit are also expanding.
Combined version of the system
Such a circuit is carried out initially on the basis of the same principles as a system with a natural movement of the coolant flow. Therefore, the boiler is placed at a lower point to ensure the free movement of warm water.
But the system is supplemented with an expansion tank and a circulation pump, so that there is the possibility of forced movement of the coolant. This is done so that you can freely choose the mode of operation of the heating system.
The combined version combines the advantages of both of the systems described above. For the operation of the circulation pump, with which the quality of heating is usually much higher, electricity is needed.
If its flow is interrupted for some reason, the movement of the coolant in the forced system will stop, but in the combined system it will not.
In order for the electric boiler to function correctly, it is necessary to bind it in accordance with the scheme. It is better for novice masters to entrust this stage to professionals (+)
Water will continue to move along the contour naturally. For heating in this case, you can use an alternative source of electricity or another type of fuel. There are options that allow you to switch the system from electric to solid fuel or gas boiler.
Water floor heating
This type of autonomous heating, whose popularity is steadily growing. It is considered more economical to operate than radiator systems. The heating circuit from a narrow plastic pipe is laid in a screed under the floor covering.
The heat carrier can only be heated to 26-28 ° C to provide the house with sufficient heat. The maximum allowable temperature is about 50 ° C, but such strong heating is usually not needed. For water underfloor heating, boilers with a heating element are well suited, which allow you to widely vary the temperature of the water.
A hydraulic comb is a necessary and important unit for a water floor heating. It can be assembled independently, although ready-made collectors with various characteristics are available for sale (+)
If it is supposed to provide hot water with the same heater, you will have to take a model with a heating element. They must include an indirect heating boiler in the piping so that the water in the DHW circuit is warmer than for heating by about 15 ° C.
In electrode devices, heating is typically 60 ° C or more. They can be used for TP, but additional installation of the mixing unit will be necessary to cool the coolant to an acceptable level.
In any case, a hydraulic comb containing such a unit will be needed to properly install this type of heating. Heating control is carried out using a temperature sensor that determines the current temperature of the coolant.
There are automatic control modules that allow you to additionally take into account the heating of the air in the room.
With the help of an electric boiler, it is possible to organize a heating system, which includes both a circuit with radiators and pipes of the warm floor
For a warm floor to function successfully, a number of important elements are needed. For example, the pipe for each individual circuit must be integral, no connections are allowed. It is necessary to carefully calculate the length of such a design, taking into account the layout of the TP circuit.
You can use special formulas to do this manually. It is convenient to use the calculators available on specialized sites. After entering information about the area, layout and other characteristics of the TP, the program will provide the necessary information.
Typically, the estimated pipe length is slightly increased to have a small margin. If it seems too short, you just have to buy a new one. For a warm floor, a filtration system is needed so that the coolant is clean enough.
Electric boiler and double tariff
One of the significant reasons for using an electric boiler for heating is the possibility of using double charging for the use of electricity. Reduced fees during the night period can significantly reduce costs.
The two-tariff meter makes it possible to pay for electricity used at night much less than during the day and saves the owners of electric boilers
You will need to purchase and install a two-tariff meter. It is worth noting that double-circuit models of equipment with a heating element supply hot water to a collapsible tap with a characteristic noticeable delay. As a result, part of the heat is lost, which reduces the effect of saving electricity.
It makes sense to supplement such a design with an external heat accumulator capable of maintaining a high temperature of heated water for a long time. Such a device is quite effective when using a two-rate counter.
Water is heated at night, stored in a warm form and used throughout the day, energy consumption in the daytime is reduced, as are bills for electricity used.
Electric boiler installation procedure:
Although the use of an electric boiler as a heating device is considered too costly, its advantages are obvious. Such devices are safe for people and the environment, operate automatically, accessible and easy to operate.
If the type of heating system is chosen correctly, and all its components are professionally mounted, the boiler will work for a long time without unnecessary costs.
Have experience using an electric boiler to heat your home? Or want to ask questions on the topic? Please comment on the publication and participate in the discussions. The feedback block is located below.