Pipes are a widespread building material. They are used in the installation of various systems. During installation, situations happen when pipes need to be joined at an angle. The production technology of such works is not standard, but you need to know about it.
To create a complex joint configuration, pipe cutting at an angle is required. We will describe how such operations are performed and what cutting methods exist.
Pipe cutting techniques at an angle
Considering the methods of work - cutting directly or at an angle - it is necessary to take into account the different material of the products subjected to processing. So, sleeves made of polypropylene or thin copper are easier and easier to cut than thick-walled steel pipes.
Plastic products of small diameters are cut at the right angle using special scissors. At the same time, you can control the angle with an ordinary protractor. Cutting of polymer pipes is also performed by a conventional hacksaw with a fine-toothed blade.
Cutting pipes in the process of working with these mounting elements is very common. A popular tool for such cases is the so-called grinder. With this tool, cut straight and at an angle
The most frequent installation need is cutting water, sewer and ventilation pipes at an angle of 45º.
Image Gallery
Photo from
Pipe cutting for assembly of pipelines is performed if there is no fitting on sale that can solve the problem, or if a curly final cut is required
The connecting unit by cutting pipes is made if between adjacent pipes less than 45º. For example, if three collectors are connected to one
In order to perform cutting with maximum accuracy make patterns. With their help, marking the pipe
Cutting metal pipes at an angle on an industrial scale is performed by CNC machines. Private traders cut with a grinder, securing the pipe in a vice, or an electric saw with fixing the pipe in the miter box
An excellent tool in the spatial cutting of a metal pipe will be a jigsaw for metal. However, before work it is advisable to "get your hand" on the waste scraps
Cutting a profile pipe is the easiest and easiest way to grinder. It is possible to fix a profile both in a vice, and in a miter box
If it is planned to cut at an angle once or twice in the pipeline assembly, it is enough to use an electric saw with a metal sheet
It is permissible to cut the polymer pipe at an angle with an ordinary hand saw, but it is very important to fix it in the miter box so as not to spoil the material
Pipe cutting options at various angles
The angle between the nozzles is less than 45 degrees
Work pieces cut from a pipe
Using a grinder in cutting pipes
Using a jigsaw for metal
The use of grinders in profile cutting
Electric saw cutting
Cutting a polymer pipe with a conventional saw
We will find out which devices can be used for cutting at various angles.
Paper pattern for pipe
For the execution of a relatively accurate cut, you can apply a simple technique, where an ordinary sheet of paper acts as a kind of pattern. For example, it is suitable for creating patterns of A4 printer paper.
Previously, the sheet is marked out under a square using a ruler. The diagonal size of the square should be equal to the circumference of the pipe to be cut. Excess parts of the sheet are cut off.
The simplest way to get a marking line on a pipe to produce a cut at an angle of 45 degrees. A plain sheet of paper is used that is applied to the pipe body in the cut area.
Next, the following steps:
- Bend the sheet diagonally by aligning opposite corners.
- Rotate the resulting triangle so that the hypotenuse line is perpendicular to the axis of the pipe.
- In this position, wrap the pipe surface with paper, aligning the extreme points of the hypotenuse together.
- Mark with a marker the cut mark along the line of any of the legs of the triangle.
- Trim the pipe along the intended line.
In this way, it is quite convenient to mark and cut pipes at an angle of 45º in the range of diameters from 32 to 63 mm. For greater convenience, it is recommended that you take thick but soft paper. You can also use paronite and similar materials.
How to correctly choose a pipe cutter for plastic pipes and how to use it in practice is described in detail in our article.
Properly made patterns for figured pipe cutting allow you to cut sections with extremely high accuracy. At the same time, a gap between the prepared workpieces is still possible. In the connection of metal pipes, it is “closed” with a weld seam, when connecting plastic parts, a specialized soldering cord is used.
Image Gallery
Photo from
Combination of angled parts
Fitting parts for precise alignment
Welding metal parts
Branch pipe cutting options
Programs for calculating cutting angles
Cutting technology for patterns allows you to get different cutting angles. But for the formation of a pattern at angles other than 45º, it will already be necessary to perform mathematical calculations and, based on the calculated data, cut out the template from paper or similar materials.
True, there are computer programs designed to save the wizard from the production of calculations. Patterns for pipe cutting such programs are printed on a printer.
This is how the window of a computer program that calculates the cut angle for a pipe of circular cross section looks like. Based on the calculation results, a pattern emerges that is printed by the printer. The pattern is used in the manufacture of patterns
A simple calculation program, created on the basis of MS Excel, allows you to calculate and compose a pattern for almost any value of pipe diameters and the required cutting angles.
All that the user needs to do is enter the corresponding values in the “Outer Diameter” and “Cutting Angle” cells. According to these parameters, a pattern will be formed that can be sent for printing.
An example of a pattern obtained by the calculation method in the popular Excel program. The calculation of the points of passage of the curve is carried out on the basis of only two given parameters - the diameter of the pipe and the required cutting angle
The disadvantage of the program is that it does not take into account the thickness of the pattern sheet, which leads to minor inaccuracies.
Pipe cutting miter box
There is a simple tool, often used in everyday life, mainly for working with wood. It is called - a miter box. So, this same device is suitable for cutting pipes, and at different angles.
The miter box is on sale, but if you want, you can always do it yourself and adjust the design to the desired pipe diameter:
- Take a wooden board with a width equal to the diameter of the pipe, 400-500 mm long.
- Take two more boards of the same size, but in width increased by the thickness of the first board.
- From three boards to assemble the design in the form of an inverted letter "P", where the first board is installed as the base.
- In the central part of the structure, mark a rectangle, the two sides of which pass along the inner borders of the side boards.
- Divide the rectangle with diagonals and along the lines obtained on the upper faces of the side boards, make cuts down to the base.
In this way a template is made for cutting at an angle of 45º. But with the help of a protractor, you can mark almost any angle and make cuts under the pipe cut for a specific angle.
The advantage of the miter box - the tool is suitable for repeated use. Work with the tool is permissible to such a degree of wear of the walls of the slots, while they can provide high precision cutting. It is recommended that the tool walls be made of a material of higher strength than wood.
This looks like a possible design of the miter box - a device thanks to which it is also possible to cut pipes at different angles. However, the miter box is usually convenient for cutting small pipes.
The advantages of the method are obvious - simplicity, ease of manufacture of the tool (miter box), efficiency, versatility. The disadvantages of working with such a snap option are the need to adjust the size of the miter box to the pipe diameter, provided that an accurate cut is made. That is, for each pipe you have to make your own tool.
Also, with the help of a miter box, you can cut a pipe only with a hacksaw for metal or a secateurs (for plastic products). For working with thick-walled metal pipes under a cut grinder, this tool is not suitable.
Simple cutting equipment
Metal products of round and rectangular shapes, having sufficiently thick walls, are conveniently cut at an angle using straightforward electromechanical equipment.
The cutting element of such a tool is a cutting disc or circular saw mounted on an electric motor shaft. In turn, the electric motor with a torch is part of the entire equipment, which includes the desktop, pendulum support, clamp.
Electromechanical device for cutting pipe elements, including at different angles. A disk cutter and a simple mechanical system for fixing the pipe in different positions are used
To install the pipe at the desired angle and then fasten it, an ordinary clamp and two metal corners are used. One corner (short) is attached to the base of the swing mechanism - the pendulum. The second corner (long) is in a free state.
Pipe laying and cutting procedure:
- The rotary mechanism sets the desired cutting angle (for example, using a ruler and protractor).
- The found position is fixed by clamping screws.
- Between the short and long corners, a pipe is laid and pressed against the clamp screw.
- A voltage is applied to the electric motor.
- Applying a slight pressure force to the torch disc, the pipe is cut in the right place.
The advantages of this technique are fast work, accurate cut, the ability to process a large number of pipes in a short period of time.
Disadvantages: restrictions on use in domestic conditions, increased noise, work with pipes of only small and medium diameters. In addition, the snap cutting process is carried out stationary at a distance from the installation site, which is not always acceptable.
If you intend to make a copper pipeline at home, then special pipe cutters will be required, the selection of which we recommend that you familiarize yourself with.
The nuances of working with a rectangular section
To perform cutting of rectangular products, it is recommended to prepare template cuts of corners in advance. They are easy to make from a metal corner, previously marking with the same protractor.
Cutting rectangular pipes (profile elements) at the required angles is usually performed according to the templates. Such patterns are made of metal corners of various sizes.
Marking can be done for different angles. To use the template in the case, it is enough to attach it to a rectangular pipe in the right place and mark the cut line. Then, using any suitable tool, cut along the intended line.
Precision Cutting Machines
Among the branded devices that could be used in everyday life for cutting at an angle, you can pay attention to Italian-made technology.
The MASS Mini Cut Band Saw is a small-sized device with a manual clamp, for working not only with pipes, but also with corners, rods, and profile elements.
Convenient and productive apparatus for cutting pipes of small and medium diameters. The cutter is made on the basis of a steel strip that can be mounted to cut at an angle
The machine supports setting the cutting angle from 0 to 45º. The procedure is carried out using a tape web at a speed of 45 reciprocating movements per minute. The device is equipped with an electric motor with a power of 370 W, which is powered by a household network. The maximum allowable diameter of the cut round pipe is 65 mm.
Numerous installations with electromechanical and electric drives have been developed on an industrial scale for pipe cutting. Technically sophisticated machines allow for high precision thermal, oxygen and plasma cutting:
Image Gallery
Photo from
On-site pipe cutting machine
Spatial cutting machine in seven directions
Mechanized manual gas device
Mobile device for large pipes
Industrial models (for example, BSM)
There are special industrial machines for precise angle cutting operations. A good example: devices manufactured under the brand name "BSM". The machine manufacturer is the German company Rexinger.
True, the BSM series machines are designed exclusively for working with polypropylene pipes of sufficiently large diameters. Processing of products like PP, PVC, PE, PVDF is supported.
Industrial machine for cutting pipe products from polymers. Designed to work with products of large diameters, but has equipment for processing pipes from 50 mm. The machine provides cutting in a wide range of angles
The cutting tool of the machine is a band saw, due to which the cut is performed at angles from 0 to 67.5º. The precision of the process is provided by a laser cutting recognition.
Despite the configuration of the device for products with large diameters, you can use a special table with which pipes of small diameters (50 - 200 mm) are also successfully cut, which are easier to cut with a pipe cutter. A wide range of BSM devices is available.
The use of thermal methods
In addition to mechanical methods, thermal methods are often used, where welding or cutting machines work as tools. For example, an autogenous gas cutter or a conventional welding machine (direct / alternating current).
Using such cutting machines, thick-walled metal pipes are available. However, it is extremely difficult to obtain a perfectly even high-quality cut using the electric welding or gas autogen method.
Electric and autogenous cutting technology is ubiquitous. The technique does not provide high precision cutting, but when installing pipes, this factor is often not determining
Electric and autogenous cutting technology is ubiquitous. The technique does not provide high precision cutting, but when installing pipes, this factor is often not determining
Usually, after thermal cutting, the products are subjected to additional processing. The cut line is aligned, the values of the required angle are adjusted. This approach is economically disadvantageous, as it is accompanied by additional costs for machining.
As a rule, the thermal cutting technique is applied in the conditions of industrial production. True utility services also often resort to such a technique.
Thermal cutting is also used for working with plastic material. There are devices - thermal guillotines. The sharp thin blade of such devices is heated to a high temperature, after which they perform a cut.
Thermal guillotines support cutting at an angle, and this is their advantage. However, for working with tougher materials than polyvinyl chloride, wood, chipboards, these devices cannot be used.
For cutting metal-plastic pipes, pipe cutters are needed that can evenly divide into parts of the product with a multilayer structure.The article recommended by us is devoted to their varieties and methods of application.
The video shows the calculations and shows a workshop on how to cut pipes at angles of 45º and 90º:
For each individual installation case, you can choose the most convenient and less expensive method of cutting. The specific choice depends on the material of the pipe, its diameter, wall thickness.
Using simple marking methods, you can get a fairly accurate angle at which you want to cut the workpiece. At the same time, turning to a complex calculation procedure, it is possible to cut at non-standard angles with high accuracy.
Do you have useful information on the topic of the article? Do you have questions in the process of familiarization with the material or found controversial issues? Please write comments in the block below.