To heat temporary buildings, garages, greenhouses, utility rooms, a potbelly stove is often used. But it also emits combustion products, a lot of smoke from burned wood or other fuel.
Therefore, you will need to decide how to make a chimney for a stove and where it is better to install it so that it is inexpensive and efficient. Moreover, this can be done with your own hands. And everything is not as complicated as it might seem at first glance.
To make it easier for you to understand the assembly and installation of the chimney, in this article we examined a step-by-step process, starting with the choice of material and assembly and ending with a test of the operability of an already installed system.
What can a chimney be made of?
To use a potbelly stove, you will need to take care of the removal of smoke. To do this, you have to build a chimney, choosing the optimal material.
To carry out work, you can invite specialists, but you can do everything on your own - especially since the amount of work is small.
Types of chimney pipes
Various materials are used to make the smoke exhaust pipe.
Initially, depending on the material of manufacture, there are 2 options:
- Take finished pipes made at the factory;
- To make pipes from sheets of stainless steel or other sheet metal.
The cheapest way is to make pipes yourself. Here, the undoubted advantage lies in the fact that the pipe will be the right diameter, which is especially important for home-made stove bourgeois.
For a chimney, potbelly stoves can independently produce not only ordinary pipes, but also double pipes - sandwich pipes. To do this, you need 2 pipes of different diameters and a heat-resistant insulation
The second advantage of homemade pipes is cost. For their manufacture, you can use improvised material, or purchase metal sheets with a thickness of 0.6 mm or more. And better in 1 mm.
Moreover, it is possible to make an insulated pipe for the chimney by making 2 pipes of various diameters from sheets 2. Or take finished metal of different diameters. In addition to self-production of pipes for the chimney, you can stop at a simpler and faster option - buy finished pipes from the right material.
An elementary option for assembling a chimney for a potbelly stove involves the use of finished steel pipes and a corner element. A smoke channel is collected from them and welded to a makeshift stove:
Image Gallery
Photo from
Step 1: Welding the nozzle to the top of the stove
Step 2: assembly of the flue duct
Step 3: Bringing the potbelly stove chimney out
Step 4: Construct the outside of the pipe
Among the most common materials are the following:
- Brick. This is the cheapest material. From it lay the chimney on the spot, but this will require skill;
- Steel. Stainless, galvanized, alloyed (carbon) pipe can be used as a chimney;
- Ceramics. Ceramic products are of high cost, which excludes the installation of a ceramic chimney in a garage or utility room;
- Asbestos cement. Asbestos-cement products are affordable, but not suitable as a material for the construction of the chimney. Although often they can be seen in this role;
- Vermiculite. These pipes are made of stainless steel with a 5-cm layer of vermiculite deposited on the inner surface of the pipe.
In addition to such options, the market offers many other products. So, you can meet pipes made of heat-resistant glass, from which it is quite possible to build an exotic chimney. But this is done extremely rarely - skill is needed to install and connect individual structural elements to each other.
For a potbelly stove it is inexpedient to buy expensive pipes. To make a chimney, it is enough to buy metal heat-resistant pipes and adapters for mounting the entire structure
Recommendations for choosing a pipe for a stove
To make a chimney for a stove, it is not necessary to build pipes from metal sheets with your own hands. This will require some skill and time.
After all, the sheets will first need to be rolled into a tube of the desired diameter, and then tightly fasten the seam using rivets and heat-resistant sealant. It is much easier and faster to buy the necessary products manufactured at the factory.
To assemble the entire structure of the chimney and tightly fix its individual components, you need to use a heat-resistant sealant that can withstand temperatures from 1000 degrees Celsius
As for the material, you should not take cheap asbestos-cement pipes for these purposes - this material will not stand if the temperature during the furnace rises above 300 degrees Celsius. And the pipe itself is quite heavy.
It will also absorb condensate. And to make a hole for cleaning from soot or removing condensate will be problematic.
To make a chimney for a stove from brick is unreasonably high expenses. Firstly, rarely do any of the home masters know how to do the right masonry. And secondly, it is a bulky design that requires additional reinforcement of the foundation. A potbelly stove is a temporary heating equipment.
A metallized corrugation can serve as a temporary substitute for a stationary metal pipe, but for constant use it must be replaced with a metal pipe:
Image Gallery
Photo from
So that you can immediately start using the newly made potbelly stove operating at mining, the chimney function can be entrusted to a corrugation with a diameter of 100 mm
The knot for connecting the corrugation to a home-made stove and its withdrawal outside the garage must be carefully sealed with metallic tape
A temporary solution, corrugation, must be changed without fail. The best option is to buy steel elements for the chimney. Home craftsmen can assemble a channel from the used VGP pipes
The pipe to which the chimney will be connected can be welded or screwed using a flanged disk that is cast with it
Pipes and pipes with flanges in the example are used in all critical connections and in the passage through the garage roof
To ensure sealing in units with flange connections, a paronite gasket is used, cut to the size of the flange
The smoke channel is sequentially collected from sections partially prepared for installation
Using the flange, the passage of the smoke channel from old pipes through the attic floor, wall or roofing system of the garage is arranged
Step 1: Install the corrugation instead of the pipe
Step 2: Sealing the connection points
Step 3: Selection of components for assembling the chimney
Step 4: Flange connection of the nozzle to the stove
Step 5: Using flanges in row connections
Step 6: Apply a Paronite Gasket
Step 7: Assembling the Smoke Canal from Old Pipes
Step 8: Arranging Driving Using a Flange
It is optimal to take metal pipes from stainless steel, and preferably from alloy steel. A structure made of such material is able to serve as a chimney for 7-10 years. This is provided that the pipes of sufficient thickness are 6-10 mm or more. And the build quality of all elements of the smoke exhaust system plays an important role.
Another undoubted advantage of metal pipes is their lightness. Light weight allows you to single-handedly perform all the work on the construction of the chimney for the stove.
Image Gallery
Photo from
Waste oil potbelly stoves
Indoor stove chimney
We also recommend that you familiarize yourself with more complete information on choosing a chimney pipe.
Having decided on the material of the future chimney, you can proceed with the purchase of all components and the construction of a correct and workable design.
Chimney Construction Instruction
The complexity of constructing a chimney for a stove is dependent on where the stove will be installed. After all, cutting a hole in the roof is more difficult than passing a pipe through a window.
Therefore, the complexity and time of manufacturing the correct chimney for a stove is completely dependent on the individual characteristics of a particular home ownership.
Stage # 1 - chimney assembly
The easiest option for constructing a chimney is if you have to use a potbelly stove on the street. It is important to choose the best place to install the stove so that flammable objects do not come into contact with it. Yes, and the pipes themselves must be heat resistant.
For a potbelly stove on the street, it is enough to attach a pipe of the desired diameter, through which smoke will go. This will increase traction and protect the user from exposure to smoke.
If the smoke removal pipeline is to be constructed indoors, then a number of safety rules must be observed that will help protect yourself and your loved ones from the fire.
First, the pipes must withstand high temperatures - preferably 1000 degrees Celsius and above. After all, the smoke emitted during the combustion of fuel in a potbelly stove can have a rather high temperature.
Secondly, it is important to position the stove itself so that it does not come into contact with surfaces that may catch fire. If the walls are finished with lining or plastic, then additional work remains to be done to protect themselves from the occurrence of a fire hazard.
The floor under the stove should be made of material that is not able to ignite. If a burning log accidentally falls out of the furnace, this will protect the room from fire
Thirdly, the place of entry of the pipe into the ceiling or wall should be properly framed.
To do this, it is important to maintain a distance to nearby objects and walls - during the operation of the stove, the temperature of the pipe will increase and objects nearby can flare up.
It is important to carefully isolate all places of contact of the chimney with a tree, insulation or other combustible materials. Otherwise, fire cannot be avoided.
Fourth, only one potbelly stove can be attached to one chimney. For a second stove in an adjacent room, it is better to lay a separate smoke exhaust pipe.
Stage # 2 - taking measurements
At the preparatory stage, it is necessary to determine the desired diameter of the pipes and their total length. First, calculate the diameter of the pipe. Correctly, if it will be 2.7 times larger than the volume of the combustion chamber.
So, if a potbelly stove is 50 liters, then the diameter of the chimney should be: 50 * 2.7 = 135 mm. So, if you take a pipe with a diameter of 100 mm, it will not cope with the smoke emitted. As a result, there will be weak traction and effective work from such a potbelly stove is useless to wait.
Also calculate the required number of connecting parts - elbows, tees and other accessories
In addition, the length of the future smoke removal pipeline is to be measured. To do this, it is important to choose a permanent location of the potbelly stove in the room.
Then determine where the pipe will go outside. An important point - during the removal of smoke in the chimney, passing on the street, condensate will accumulate. It is worth taking care of its removal.
To remove condensate, a tee should be installed to help deal with this problem.
Now we have to measure the distance of the pipeline on the street and not forget that the chimney will rise, on average, 1.5 meters above the ridge of the roof.
It should also be provided that during the installation process you will need elbows, tees, a through hole, butt joints, heat-resistant sealant, asbestos cord, pipes of the desired diameter, pipe clamps or welding to connect all components to a single chimney design.
All this must be acquired on time, when all measurements are taken. The availability of the necessary materials will allow you to proceed with the installation of the chimney for the stove.
The hole for the passage glass is also made in advance. It is important to carefully remove all materials that may catch fire.
It remains to be decided in advance exactly where the pipe will go out:
- through the window;
- through the wall;
- through the ceiling.
This will determine where to make the hole. Most often, a pipe is let through a wall or ceiling. To ensure security in this place you have to buy a special passage unit - a glass. It is made of heat resistant material that will protect from fire.
The passage glass is installed first. And only then it is necessary to assemble the design of the chimney
Stage # 3 - installation of all components of the structure
When it comes to a potbelly stove that works on the street, it is important here to take a pipe of the right diameter corresponding to the pipe branching from the potbelly stove.
The chimney must be put on the pipe. This is important, because if it is inserted into the nozzle, then smoke can seep out at the junction. You don’t have to install anything else - a potbelly stove can be used for cooking or heating food.
If we are talking about arranging a chimney in a utility room, in a garage or a greenhouse, then the procedure for carrying out the work will be more complicated. First you need to take a piece of pipe and carefully fix it on the chimney hole / pipe nozzle. It is important to put the pipe on this pipe.
Then you have to lengthen the pipeline using a bend. The goal is to reach the wall / ceiling. A passage glass is already waiting here, through which a chimney will pass.
Around the glass through passage you need to remove the insulation and other materials that may catch fire
Further, the pipeline goes into the under-roof space and onto the roof or through the wall into the street. It is important that the outdoor pipe is insulated. Also, when the pipe goes outside, it is necessary to provide for the removal of condensate. To do this, put a tee and make an inspection window to simplify the cleaning of the chimney.
It is important to securely fix all connections, maintain a distance to walls and other objects that can easily catch fire.
Image Gallery
Photo from
Potbelly stove and chimney stand remotely from the wall
Asbestos insulation cord
Welding for connecting chimney elements
Using a flash master to equip and seal the passage of the chimney through the roof greatly facilitates and speeds up the work:
Image Gallery
Photo from
Step 1: Installing the flash master in the chimney
Step 2: Making the Skirt Fit
Step 3: Sealing the fit line with silicone
Step 4: Screwing the flash master with screws
Stage # 4 - System Check
When all the components of the chimney are assembled and firmly interconnected, you can proceed to the final stage - the installation of the hood and checking the operability of the structure.
So, sparks can fly out of a stove in the process of burning fuel.
Often you can see sparks flying out of the chimney during the combustion process - the spark arrester will protect them from them. You can do it yourself by constructing a skirt on a regular cap
As a spark arrester, you can use a grid with small cells, the size of which is up to 5 mm. This is especially true if the roof or nearby structures are made of flammable materials.
If there is no danger of a fire, then you can do with a simple cap that is worn on the end of the chimney and fixed there with a clamp or carefully fixed with rivets.
To increase traction, you can use the deflector by choosing one of the options on the market, or by assembling it yourself. We offer you to familiarize yourself with the detailed instructions for the independent manufacture of a chimney deflector.
The hood chimney hood can be made independently using improvised materials.To do this, a dense sheet of steel with a thickness of 5 mm
When the hood is installed, you can begin to check the operability of the entire chimney structure. To do this, you need to load fuel, set it on fire and see how it will burn and how smoke will escape.
If it begins to seep through any connection, then it is not hermetic. This problem needs to be fixed using heat-resistant sealant or welding.
If the work is carried out efficiently and all the joints are tight, then the chimney will perfectly remove smoke. And the smell of smoke will not appear in the room
Features of the chimney service
The chimney of the potbelly stove needs maintenance - inspection of the external state of the structure and cleaning of the inner space of the pipe. The frequency of maintenance is completely dependent on the material.
If this is an asbestos-cement chimney, then it will have to be cleaned more often. This is all due to the rough inner surface of the pipe, where soot accumulates with a vengeance.
Also, an asbestos chimney, if installed to remove smoke from a potbelly stove, may soon become stained or even burst during operation. This will lead to additional costs - you need to replace the chimney pipe.
The spots that appear on the asbestos pipe not only create an unpleasant impression with their appearance, but are also harbingers of the appearance of unpleasant odors
For a metal chimney, the frequency of pipe cleaning is on average 1 time per year. It is also important to inspect the external state of the material - it is quite possible that some areas may burn out.
To remove soot from a metal pipe, you can:
- burn aspen wood;
- treat burned logs with a special chemical composition, which is easy to buy;
- make a hook for delicate soot removal.
Soot formulations are easy to use. They do not require special skills - it is enough to process firewood with a sachet and kindle a potbelly stove, as usual. The products of combustion will not contain harmful impurities. This is a safe way to clean a metal pipe.
The consumption of the product and the method of applying it to the logs are indicated in the manufacturer's instructions. It is important to carefully read the recommendations and clearly implement them.
In a metal pipe that removes smoke, soot most often accumulates in a horizontal section.
Experienced users of such chimneys have found a convenient solution - to drill a small hole and build a hook-shaped structure to remove soot. With this device, the pipe wall cannot be damaged, but it will be possible to clean the accumulated burnt.
The hook-shaped design is easy to manufacture, and it is quite convenient to use. Most often this is a section of the pipeline located on the street
A thorough examination of the external condition of the chimney will allow you to diagnose the need for replacing a particular area in time. Do not neglect this measure - because through the holes in the chimney the smoke will go into the room, and further operation of the heating device will become impossible.
Regular soot cleaning of the inner walls will help extend the life of the smoke exhaust pipe. Yes, and thrust will always be at the right level, which positively affects the efficiency of the stove.
Our site also has other articles containing detailed information on the best methods for cleaning the chimney and recommendations for choosing a cleaning product. We suggest you familiarize yourself with them:
- How to clean the chimney from soot: how to properly clean the chimney
- Chimney cleaners: the best way to clean the chimney from soot
- Chimney sweep log for chimney cleaning: composition of the product and rules of use + owner reviews
The subtleties of self-assembly of the chimney design are shown in the video clip:
Inexperienced craftsmen often make mistakes when installing the chimney. A video clip tells about the most common problems:
If there is a problem with the release of smoke into the room, then it can be quickly and simply solved. The video shows how to do this:
To service a metal chimney of a potbelly stove, you can use a simple method of delicate physical cleaning:
It is not difficult to make a chimney for a potbelly stove if you approach the task responsibly and do everything correctly. Only in this case, the compact stove will serve for a long time, without requiring additional attention to itself.
And the quality of its work will always please, the main thing is to timely clean the chimney from soot and other combustion products.
Do you use a potbelly stove equipped with a homemade chimney? Share your assembly experience and photos of the finished chimney in the comments section. Tell us what material you used for the chimney and how difficult it was for you to make a chimney.